22 roofing terms explained

Algae

Dark streaks and spots on shingles caused by algae growing on the roof surface.

Asphalt

A bituminous waterproofing agent applied to roofing materials during manufacturing.

Blistering

Bubbles in roofing materials, usually caused by moisture trapped under or inside the material.

Closed cut valley

An installation method where one roof plane’s shingles completely cover the other’s, and the top layer is cut to follow the valley line.

Course

A row of shingles or roll roofing running the length of the roof.

Cupping

Shingles that curl up at the edges, often from improper installation over an existing roof, overexposure or a manufacturing defect.

Deck

The surface installed over the roof framing that the roofing is applied to, usually plywood, OSB, planks or boards.

Dormer

A raised section that extends out of a larger roof plane, typically framing a window.

Drip edge

An L-shaped metal strip along the roof edges that directs water off the roof and into the gutters instead of behind the fascia or siding.

Eaves

The horizontal lower edge of a sloped roof, typically the first 3 feet of the roof.

Fascia

The vertical trim board along the roof edge that the gutters attach to.

Flashing

Metal pieces installed where the roof meets walls, chimneys, skylights and vents to keep water out of the joints.

Granules

The small mineral particles on top of asphalt shingles that protect them from the sun. Lots of granules in your gutters is a sign of an aging roof.

Ice and water shield

A self-sealing waterproof membrane installed in valleys, along eaves and around penetrations to stop leaks from wind-driven rain and ice.

Pitch

How steep a roof is, written as inches of rise per 12 inches of run (for example, 6/12).

Rake

The sloped edge of a gable roof that overhangs the wall, and the board or trim along it.

Ridge

The horizontal peak where two roof planes meet, covered with ridge cap shingles.

Soffit

The finished underside of the roof overhang, often vented to let air into the attic.

Square

The unit roofers use to measure a roof: one square covers 100 square feet.

Underlayment

The layer installed over the roof deck, under the shingles, as a secondary barrier against water.

Valley

The V-shaped channel where two sloping roof planes meet and water collects.

Ventilation

Intake and exhaust vents that move air through the attic to remove heat and moisture and help your roof last longer.

Call nowRequest a quote